|
|
#1 Photo Products - Neoflex LCD Stand, Black
|
List Price: $65.45
Our Price: $34.76
Your Save: $ 30.69 ( 47% )
Availability: Usually ships in 24 hours
Manufacturer: Ergotron
|
Average Customer Rating:  
|
|
Batteries Included: 0
Binding: Electronics
Brand: Ergotron
EAN: 5051749406214
Feature: Monitor Stand in black
Is Fragile: 0
Is Memorabilia: 0
Label: Ergotron
Manufacturer: Ergotron
Model: 33-310-060
Publisher: Ergotron
Studio: Ergotron
Warranty: 3 years warranty
|
|
|
Features
|
Monitor Stand in black
Additional Features: Weight-Adjustable, 70 Degree Right/Left Swivel, 90 Degree Rotation, Lift-and-Pivot Motion Technology, Height-Adjustable, 35 Degree Up/Down Tilt
|
|
|
|
|
|
Spotlight customer reviews:
|
Customer Rating: 
Summary: Great item for the Price
Comment: I needed a replacement stand for an LCD monitor, and theNeoflex LCD Stand fit the bill exactly. I am using it with a 17-inch View Sonic monitor that had been previously wall-mounted. It fits any standard VESA mount with the provided screws and washers, and it has a small footprint, so it doesn't take up too much room on your desk.
The stand adjusts vertically and tilts up and down. In addition, you can swivel the monitor either portrait or landscape. You can adjust the tension on all of the vertical adjustment with a provided hex wrench. Finally, the main neck has a hole at the bottom to feed your cabling through. For my purpose, the folks at Neoflex thought of everything. I would recommend this product to anyone who needs a standard LCD stand to avoid buying a new monitor.
Customer Rating:
Summary: title
Comment: perfect, except for a few (minor) issues:
of the 3 sets of screws, not one was the "proper" length, so I had to make do.
the vertical adjustment is to easy, and if you bump the monitor, it's height will change.
other than those two minor complaints, it is a great stand
Customer Rating:
Summary: Great stand for a reasonable price
Comment: I use dual monitors on my "work" system which is used primarily for working with word documents. I find that having one of my displays in portrait mode and one in landscape mode works well for most of my work but monitors with factory stands that adjust for height, tilt, swivel and rotation are rare and (usually) much more expensive that the standard tilt only adjustment. The best thing about it is if (when) I have to replace a monitor I can shop by price and reuse the stand rather than spending the extra money to buy a display with a fancy factory stand.
Customer Rating:
Summary: Works well, looks good, robust
Comment: I have used this monitor stand to be able to rotate my wide screen.
Assemble and attach the screen in minutes.
Moving the screen up and down and rotating it is very easy.
Great value for the price.
Customer Rating:
Summary: When expectations are exceeded
Comment: The internet age is great because you can find almost anything and with several hours of diligent review reading, can identify an item that appears to meet your need(s). However, the proverbial "rubber hits the road" when the FedEx/UPS/USPS delivery person kindly drops off your package. If you have bombed in your decision, then you face non-trivial return shipping costs, potential restocking fees, and lost time to achieve your desired goal. Typically, I search, contemplate, and search some more prior to pressing the order submit button. Eventually, I hope for the best, but resign to accept "average" if the product will simply work as described and appear to have a life cycle longer than 12 months.
Thus, although I read the glowing reviews for this item, I did not have high expectations. The reviews here simply assured me that the item was an economic production from China. Imagine my surprise when I lifted the box from my porch to take it into the house. That box had some heft to it, that was a good thing. Once in my office, I opened the box and the smiles appeared. This is a quality product. There is a round circular base that attaches to the vertical portion of the stand via two phillips screws. Total assembly time with my ratchet screwdriver? Two minutes to ensure no cross threading and adequate seating torque. The monitor mount of the stand can accommodate any VESA mount with either 75 mm or 100 mm spacing. You are provided with phillips screws to attach the mount to the mounter, but you are also provided with thumbscrews. I prefer the knurled thumbscrews. The thumbscrews are black so they compliment both the mount and a black monitor.
I purchased the stand for my 22" monitor. Installing the four thumbscrews in the 100 mm spacing took perhaps 3 minutes. Viola, c'est fini! You can adjust the tensioning of the mount in order to accomodate a larger monitor or have the monitor better respond to your tactile pressures. The monitor stand easily rotates 360 degrees. The monitor height is adjustable in the vertical direction 5". I would estimate that the monitor tilt is 90 degrees from its lowest to maximum tilt. All adjustments are nearly effortless. The caveat here is that "effortless" is determined by my build and your mileage may vary. The stand will also allow your monitor to rotate from landscape to portrait mode.
Prior to mounting the 22" monitor, I mounted a 19" widescreen DCL LCD monitor that I purchased several years ago. I greatly disliked that monitor and had stopped using it. The picture always seemed small. The DCL monitor stand was an economical one, it provided no height adjustment and limited tilt. I mounted the DCL because I wanted to test the stand's operation before I mounted my more expensive 22" monitor. Four thumbscrews later I powered on the DCL, raised it 4" and thought, "hey, this monitor is not so bad!" That is the difference that the monitor stand made. I then installed the 22" monitor and the stand really performed. I thought that I would have to adjust the tensioning, but it was just fine. In 30 seconds, the monitor was at the perfect height and tilt for me. It has been a week and no adjustments were necessary as a result of the stand slowing lowering the monitor.
Okay, allow me to put into perspective my experience with LCD monitors and their stands. My primary home office monitor is a Samsung 245BW 24" LCD. I like the Samsung's stand, but think that the Neoflex is better. I also have a 20" widescreen Dell 2007FP monitor. The Dell stand does not swivel (rotate 360 degrees on the desk) and the height adjustment is less than the Neoflex. In my work office, I have two 24" widescreen Dell 2407 monitors. The height adjustment is very poor on these and there is no swivel.
In summary, this is an awesome monitor stand at a very competitive price. You will be hard pressed to find a better stand at an equal quality and price.
|
|
|
Editorial Reviews:
|
Instantly set the height of your LCD for a more comfortable computing experience. With fingertip effort, raise or lower your LCD 5" (130 mm), pan left/right, tilt forward/back, and rotate your screen for portrait/landscape viewing.Upgrade monitors or TVs with improved ergonomic adjustability. Patented CF lift-and-pivot motion technology provides premium adjustment. Neo-Flex is the only weight-adjustable desk stand LCD accessory on the market. Easily position your LCD for maximum comfort and productivity. 5" vertical adjustment enhances ergonomics for multiple users. Sleek, durable, easy-to-clean plastic exterior.
|
|
|
|
|
|
|
|
|
